Welding
Welding robots are industrial robots engaged in welding (including cutting and spraying). According to the definition of the International Organization for Standardization (ISO) industrial robot is a standard welding robot, an industrial robot is a multi-purpose, reprogrammable automatic control manipulator (Manipulator), with three or more programmable axes for field of industrial automation.
Product Video

Welding robots are industrial robots engaged in welding (including cutting and spraying). According to the definition of the International Organization for Standardization (ISO) industrial robot is a standard welding robot, an industrial robot is a multi-purpose, reprogrammable automatic control manipulator (Manipulator), with three or more programmable axes for field of industrial automation. In order to adapt to different purposes, the mechanical interface of the last axis of the robot is usually a connecting flange, which can be connected to different tools or end effectors. The welding robot is equipped with welding tongs or welding (cutting) guns on the flange of the final axis of the industrial robot, so that it can perform welding, cutting or thermal spraying.

With the development of electronic technology, computer technology, numerical control and robot technology, automatic welding robot has been used in production since the 1960s, and its technology has become increasingly mature. Therefore, it has been widely used in various industries.

Improve Welding Quality
Can reflect the welding quality in the form of numerical value.
Improve Labor Productivity
Can work without interruption.
Improve Labor Intensity Of Workers
Can work in hazardous environments.
Reduce the requirements for workers' operating skills
Simple and easy to operate, there is no need to spend time and money training workers in welding techniques.
Save Equipment Cost
The preparation period for product modification and replacement is shortened, and the corresponding equipment investment is reduced.
Product Basic Parameters
  • MR10Z-2010
  • MR10-1440
  • MR08-1840
  • MR12-2010
    • MR10Z-2010
    • Standard
    • Control cabinet
    • Programmer Specifications
    MR10Z-2010
    6-axis
    2010mm
    10 KG
    J1,J2(IP56),J3,J4,J5,J6(IP67)
    Floor type/frame type/ceiling type
    4.5KVA
    Standard 16in/16 out,24VDC
    313KG
    ±0.05mm
    Laser welding special version(MAG/MIG/TIG/Laser/AI/SS/CS)
    88.5
    45.52
    32.64
    Φ10
    Temperature0-45℃,Humidity20~80%RH,no condensing,Vibration Below4.9m/S²(0.5G),Altitude Below 1000m
    No flammable substances,no corrosive gases, no corrosive liquids,no splashing water, less oil,less dust, far away from electromagnetic,sources and magnetic fields
    Axis Range Of Motion Movement Speed
    Axis 1S ±160° 203°/s
    Axis 2L +80°to-145° 203°/s
    Axis 3U +145°to-75° 181°/s
    Axis 4R ±190° 353°/s
    Axis 5B +50°to-210° 276°/s
    Axis 6T ±220° 600°/s
    650(W)*495(D)*580(H)mm(withprotrusions)
    60kg
    Natural cooling
    1PH 220VAC,50/60HZ
    Industrialgrounding(groundingresistance below100Ω specialgrounding)
    Commonsignals:16digitalinputs,16digitaloutputs
    Serialcommunication EtherCAT,TCP/IP
    JOB:200000 steps.Robot instructions:10000.(200MB)
    Serialinterface
    RS485(1),RS422(1),RS232(1),CAN(1),USB(1)
    Servo software
    AC servo(6 axis),optional external axis
    0~+45℃(use),-20~+60℃(storage)
    10~90%RH,no condensing
    Below1000m,Degrade1%forevery additional100m,max2000m
    Below4.9m/S²(0.5G)
    No flammable substances,no corrosive gases,no corosive liquids;No dust,cutting fluid (including coolant),organic solvents,lampblack,water,slat, chemicals,anti-rust oil;No strong microwave,ultraviolet rays,X-rays,radiation exposure
    280(W)*220(D)*120(H) mm(with protrusions)
    0.6KG
    Reinforced plastic
    Selection button, axis operation button, numerical value/application button, mode switch with key/(teaching mode,playback mode, remote mode),emergency stop button,enable button,1USB port
    8-inch colorLCD.Touch screen 640×480 pixels
    IP54
    Standard:5m.Optional:up to 15m.
    MR10-1440
    • Standard
    • Control cabinet
    • Programmer Specifications
    MR10-1440
    6-axis
    1440mm
    10 KG
    J1,J2(IP56),J3,J4,J5,J6(IP67)
    Floor type/frame type/ceiling type
    4.5KVA
    Standard 16in/16 out,24VDC
    210KG
    ±0.05mm
    Welding special version(MAG/MIG/TIG/Laser/AI/SS/CS)
    103.5
    51.84
    32.64
    Φ10
    Temperature0-45℃,Humidity20~80%RH,no condensing,Vibration Below4.9m/S²(0.5G),Altitude Below 1000m
    No flammable substances,no corrosive gases, no corrosive liquids,no splashing water, less oil,less dust, far away from electromagnetic,sources and magnetic fields
    Axis Range Of Motion Movement Speed
    Axis 1S ±160° 285°/s
    Axis 2L +80° to-145° 247°/s
    Axis 3U +145° to-75° 285°/s
    Axis 4R ±190° 392°/s
    Axis 5B +50° to-210° 272°/s
    Axis 6T ±220° 1353°/s
    650(W)*495(D)*580(H)mm(withprotrusions)
    60kg
    Natural cooling
    1PH 220VAC,50/60HZ
    Industrialgrounding(groundingresistance below100Ω specialgrounding)
    Commonsignals:16digitalinputs,16digitaloutputs
    Serialcommunication EtherCAT,TCP/IP
    JOB:200000 steps.Robot instructions:10000.(200MB)
    EtherCAT(1),TCP/IP(1)
    RS485(1),RS422(1),RS232(1),CAN(1),USB(1)
    Servo software
    AC servo(6 axis),optional external axis
    0~+45℃(use),-20~+60℃(storage)
    10~90%RH,no condensing
    Below1000m,Degrade1%forevery additional100m,max2000m
    Below4.9m/S²(0.5G)
    No flammable substances,no corrosive gases,no corosive liquids;No dust,cutting fluid (including coolant),organic solvents,lampblack,water,slat, chemicals,anti-rust oil;No strong microwave,ultraviolet rays,X-rays,radiation exposure
    280(W)*220(D)*120(H) mm(with protrusions)
    0.6KG
    Reinforced plastic
    Selection button, axis operation button, numerical value/application button, mode switch with key/(teaching mode,playback mode, remote mode),emergency stop button,enable button,1USB port
    8-inch colorLCD.Touch screen 640×480 pixels
    IP54
    Standard:5m.Optional:up to 15m.
    MR08-1840
    • Standard
    • Control cabinet
    • Programmer Specifications
    MR08-1840
    6-axis
    1840mm
    8KG
    J1,J2(IP56),J3,J4,J5,J6(IP67)
    Floor type/frame type/ceiling type
    4.5KVA
    Standard 16in/16 out,24VDC
    284 KG
    ±0.05mm
    Welding special version(MAG/MIG/TIG/Laser/AI/SS/CS)
    103.5
    51.84
    32.64
    Φ10
    Temperature0-45℃,Humidity20~80%RH,no condensing,Vibration Below4.9m/S²(0.5G),Altitude Below 1000m
    No flammable substances,no corrosive gases, no corrosive liquids,no splashing water, less oil,less dust, far away from electromagnetic,sources and magnetic fields
    Axis Range Of Motion Movement Speed
    Axis 1S ±160° 149°/s
    Axis 2L +80°to-145° 125°/s
    Axis 3U +145°to-75° 149°/s
    Axis 4R ±190° 314°/s
    Axis 5B +50°to-210° 245°/s
    Axis 6T ±220° 1216°/s
    650(W)*495(D)*580(H)mm(withprotrusions)
    60 kg
    Natural cooling
    1PH 220VAC,50/60HZ
    Industrialgrounding(groundingresistance below100Ω specialgrounding)
    Commonsignals:16digitalinputs,16digitaloutputs
    Serialcommunication EtherCAT,TCP/IP
    JOB:200000 steps.Robot instructions:10000.(200MB)
    EtherCAT(1),TCP/IP(1)
    RS485(1),RS422(1),RS232(1),CAN(1),USB(1)
    Servo software
    AC servo(6 axis),optional external axis
    0~+45℃(use),-20~+60℃(storage)
    10~90%RH,no condensing
    Below1000m,Degrade1%forevery additional100m,max2000m
    Below4.9m/S²(0.5G)
    No flammable substances,no corrosive gases,no corosive liquids;No dust,cutting fluid (including coolant),organic solvents,lampblack,water,slat, chemicals,anti-rust oil;No strong microwave,ultraviolet rays,X-rays,radiation exposure
    280(W)*220(D)*120(H) mm(with protrusions)
    0.6KG
    Reinforced plastic
    Selection button, axis operation button, numerical value/application button, mode switch with key/(teaching mode,playback mode, remote mode),emergency stop button,enable button,1USB port
    8-inch colorLCD.Touch screen 640×480 pixels
    IP54
    Standard:5m.Optional:up to 15m.
    MR12-2010
    • Standard
    • Control cabinet
    • Programmer Specifications
    MR12-2010
    6-axis
    2010mm
    12KG
    J1,J2(IP56),J3,J4,J5,J6(IP67)
    Floor type/frame type/ceiling type
    4.5KVA
    Standard 16in/16 out,24VDC
    313KG
    ±0.05mm
    Welding special version(MAG/MIG/TIG/Laser/AI/SS/CS)
    88.5
    45.52
    32.64
    Φ10
    Temperature0-45℃,Humidity20~80%RH,no condensing,Vibration Below4.9m/S²(0.5G),Altitude Below 1000m
    No flammable substances,no corrosive gases, no corrosive liquids,no splashing water, less oil,less dust, far away from electromagnetic,sources and magnetic fields
    Axis Range Of Motion Movement Speed
    Axis 1S ±160° 203°/s
    Axis 2L +80°to-145° 203°/s
    Axis 3U +145°to-75° 214°/s
    Axis 4R ±190° 392°/s
    Axis 5B +50°to-210° 276°/s
    Axis 6T ±220° 1356°/s
    650(W)*495(D)*580(H)mm(withprotrusions)
    60 kg
    Natural cooling
    1PH 220VAC,50/60HZ
    Industrialgrounding(groundingresistance below100Ω specialgrounding)
    Commonsignals:16digitalinputs,16digitaloutputs
    Serialcommunication EtherCAT,TCP/IP
    JOB:200000 steps.Robot instructions:10000.(200MB)
    EtherCAT(1),TCP/IP(1)
    RS485(1),RS422(1),RS232(1),CAN(1),USB(1)
    Servo software
    AC servo(6 axis),optional external axis
    0~+45℃(use),-20~+60℃(storage)
    10~90%RH,no condensing
    Below1000m,Degrade1%forevery additional100m,max2000m
    Below4.9m/S²(0.5G)
    No flammable substances,no corrosive gases,no corosive liquids;No dust,cutting fluid (including coolant),organic solvents,lampblack,water,slat, chemicals,anti-rust oil;No strong microwave,ultraviolet rays,X-rays,radiation exposure
    280(W)*220(D)*120(H) mm(with protrusions)
    0.6KG
    Reinforced plastic
    Selection button, axis operation button, numerical value/application button, mode switch with key/(teaching mode,playback mode, remote mode),emergency stop button,enable button,1USB port
    8-inch colorLCD.Touch screen 640×480 pixels
    IP54
    Standard:5m.Optional:up to 15m.
    * Disclaimer: This data is as comprehensive and detailed as possible on the basis of existing information, but the company reserves the right to modify parameters and other information without further notice!
    MooKa Main features of welding robot
    Steady, fast, big, strong
    Stable Performance
    Yield and quality are stable
    Fast Movement
    The welding speed is 50～160cm/min
    Large Working Space
    Longest Armspan 2010mm
    Versatile
    Meet the requirements of various welding types
    Applications
    Window guardrail welding
    PRODUCT丨Building Materials丨Welding
    Construction machinery welding
    PRODUCT丨Building Materials丨Welding
    High and low bed frame welding
    PRODUCT丨Building Materials丨Welding
    Cable industry welding
    PRODUCT丨Building Materials丨Welding
    Coal machine industry welding
    PRODUCT丨General Industry丨Welding
    Auto parts welding
    PRODUCT丨Auto Parts丨Welding
    Welding of agricultural machinery parts
    PRODUCT丨Auto Parts丨Welding
    Automobile front beam welding
    PRODUCT丨Auto Parts丨Welding
    Document Download
    MooKa Robot MR10Z-2010monomer introduction
    Type：Product Introduction丨Size：87.94 MB
    zip
    MooKa Robot MR10-1440monomer introduction
    Type：Product Introduction丨Size：35.33 MB
    zip
    MR12-2010Scope & Installation Drawings
    Type：Product 3D model and CAD range map丨Size：375.56 KB
    pdf
    MR10-1440Scope & Installation Drawings
    Type：Product 3D model and CAD range map丨Size：340.69 KB
    pdf
    MR08-1840Scope & Installation Drawings
    Type：Product 3D model and CAD range map丨Size：334.28 KB
    pdf
    MR08-1840Scope & Installation Drawings
    Type：Product 3D model and CAD range map丨Size：4.57 MB
    dwg
    MR12-2010Scope & Installation Drawings
    Type：Product 3D model and CAD range map丨Size：7.12 MB
    dwg
    MR10-1440Scope & Installation Drawings
    Type：Product 3D model and CAD range map丨Size：4.83 MB
    dwg
    Request A Demo
    Please fill out the form below and one of our sales representatives will contact you shortly
    Telephone Consultation
    If you have any questions or feedback, please contact us! You can contact us in the following ways
    Wuhu MooKa Robot Technology Co., Ltd.

    telephone：400-800-5282

    mobile：+86-18668266803

    email：moka@moka-robot.com

    website：www.moka-robot.com

    address：No. 19, Weisi Road, Jiujiang District, Wuhu City, Anhui Province